An automatic shrink wrapping system is a packaging system that feeds products into the machine automatically. It then wraps each item in shrink film, seals the film and sends the pack through a heat tunnel.
Inside the heat tunnel, the film contracts tightly around the product. This produces a neat, secure package while limiting the amount of manual work required.
Automatic machines differ from manual systems because they are built for ongoing production. Once the correct settings have been entered, the equipment can wrap products repeatedly using the same settings.
How Do Automatic Shrink Wrapping Machines Work?
The exact machinery may vary, but the basic shrink wrapping process is usually similar.
1. Product Feeding
Products are transferred into the machine using a conveyor system or connected production line.
2. Film Wrapping
Each product is surrounded by shrink film before it reaches the sealing section.
3. Sealing the Pack
The machine forms a precise seal around the product.
4. Heat Tunnel
The wrapped item travels through a heat tunnel where the film shrinks.
5. The Completed Pack
The packaged item leaves the line ready for handling, delivery or presentation in a retail setting.
Advantages of Automatic Shrink Wrap Machinery
Businesses use automatic shrink wrap machines for several practical reasons.
Faster Production
Automatic machines can package far more products than manual equipment. This makes them suitable for medium- and high-volume production lines.
Repeatable Results
Each item passes through the same controlled wrapping process. This creates a reliable and repeatable pack appearance.
Less Manual Handling
Staff are not required to carry out every stage manually. Employees can then focus on other production duties.
Protection for Stored and Transported Goods
A close film covering helps shield products from dirt, damp conditions and tampering during handling, storage and transport.
Lower Film Waste
Automatic systems can regulate film use more closely than manual wrapping. This can limit wasted material without weakening the seal.
Which Industries Use Automatic Shrink Wrap Machinery?
Automatic shrink wrap machinery is used across many industries because it combines speed with consistent pack quality.
Typical sectors include:
- Food production
- Drinks and beverages
- Domestic products
- Printed materials
- Pharmaceutical products
- General consumer products
- Manufactured components
- Retail multipacks
Depending on the machine configuration, shrink wrapping can be used for individual products, promotional packs or larger grouped items.
When Is It Time to Move to Automatic Shrink Wrapping?
Many businesses start with manual or semi-automatic equipment and move to automatic machinery as production grows.
You may need an automatic machine if:
- Manual wrapping takes up too much staff time
- Production volumes are continuing to rise
- Packaging quality differs between operators
- You need greater output without adding more labour
- Products need to be wrapped continuously
For businesses with rising volumes, automation can provide steadier output with less operator input.
What Features Should You Look for in an Automatic Shrink Wrap Machine?
Machine selection should be based on product size, output targets and packaging requirements.
Useful machine specifications include:
- read more
- Maximum operating speed
- Supported product sizes
- A reliable sealing system
- Compatible shrink films
- Adjustable temperature controls
- Conveyor integration
- Simple operator controls
- Servicing and maintenance needs
Some systems can also be customised for unusual product dimensions or specialist packaging tasks.
What Is the Difference Between Automatic and Semi-Automatic Shrink Wrap Machines?
With a semi-automatic machine, an operator usually has to place the product or begin one or more stages.
By comparison, automatic machinery completes most parts of the wrapping process by itself. They are therefore more appropriate for high daily packaging volumes.
This can provide faster production, repeatable pack quality and reduced manual work.
What Is the Operating Speed of an Automatic Shrink Wrap Machine?
The number of packs produced per minute depends on product dimensions, equipment settings and the type of wrap required.
Many automatic shrink wrap machines can produce approximately 25 to 40 packs each minute. For suitable products, high-speed side-sealing machines can process more than 100 packs per minute.
Why Choose Kempner for Automatic Shrink Wrap Machines?
Kempner UK has supplied packaging machinery and shrink wrap materials for more than 50 years. The company works with businesses across numerous production environments.
Available equipment includes compact sealers, automatic L-sealers, side-sealing machines and tailored systems.
Kempner also provides commissioning, servicing and technical support. These services are intended to keep packaging equipment working reliably over the long term.
Frequently Asked Questions
Can one machine wrap several product types?
In many cases, yes. Many systems allow operators to change settings for different pack dimensions and product types. However, some equipment can be changed over more quickly than others.
Is automatic shrink wrap machinery suitable for small businesses?
Yes, particularly when a smaller company is increasing its output. Investment often becomes worthwhile when manual processes begin limiting daily output.
Do automatic shrink wrap machines reduce packaging costs?
A suitable machine may lower labour requirements, increase output and control material use. The machine must be properly selected for the products and production targets.
Can lower-impact shrink films be used?
Many current machines can use recyclable films, films containing recycled material and certain compostable options. Suitability depends on the application and equipment settings.